Description

MULTI-PURPOSE BENCH LATHE  AT520 AT750
CUTTING
 MAX. SWING DIA OVER BED: 300
 DISTANCE BETWEEN CENTER: 500
 SWING DIA OVER TOOL CARRIER: 140
 SPINDLE BORE: 26
 TAPER OF HOLE IN SPINDLE MORSE: NO. 4
 MAX. CROSS STROKE OVER TOOL CARRIER: 200
 MAX. LONGITUDINAL STROKE OVER TOOL CARRIER: 80
 METRIC THREAD KINDS ON PROCESSING: 14
 METRIC THREAD PITCH ON PROCESSING: 0.5-3 
 INCH THREAD KINDS ON PROCESSING: 20
 INCH THREAD PITCH ON PROCESSING: 11-40 1/n"
 LONGITUDINAL FEED ON SPINDLE TOOL CARRIER: 0.36-1.43
 CROSS FEED ON SPINDLE TOOL CARRIER: 0.003-0.134
 MAX. STROKE ON TAPER HOLE:50
 SPINDLE SPEED STEP: 6
 SPINDLE SPEED SCOPE: 160-1600R/MIN
 ELECTRIC MOTOR: 0.55KW
DRILLING & MILLING
 MAX. DRILLING CAPACITY: 20
 SPINDLE TO TABLE DISTANCE (MIN-MAX): 240-320
 SPINDLE CENTER TO SUPPORT COLUMN: 310
 HEAD ROTATION: 360゜
 MILLING-DRILLING HEADSTOCK VERTICAL STROKE: 80 
 STROKE ON SPINDLE HOLE: 80
 TAPER OF HOLE IN MILLING SPINDLE MORSE: NO. 3
 SPINDLE SPEEDS: 9 (315-2000RPM)
 SPINDLE SPEED SCOPE: 315-2000R/MIN
 BENCH DIMENSION: 425 X 150MM
 VOLTAGE: 220V / 50HZ/ 60HZ, SINGLE PHASE
 ELECTRIC MOTOR: 0.37KW
 N.W.: 230KGS
 OVERALL DIMENSION: 1100 X 550 X 740MM
 PACKING: 35 SETS / 1X20'CY (W/ STAND AND OIL TRAY)
STANDARD ACCESSORIES INCLUDED:
1. 3-JAW CHUCK
2. DEAD CENTERS
3. ALLEN WRENCH
4. SINGLE OPEN END WRENCH
5. DRILL CHUCK 
6. TAPERED DRIFT
7. ROCKER
8. CHANGE GEAR (13 SETS)
9. MACHINE BASE